FLX000077
Recommendations: We recommend that this product be tested for your specific application requirements. This product is not intended for use over rivets or welds. Please consult your Flexcon Sales Representative for further information.
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| Film | 4.0 (102) +/- 10% |
| Adhesive | 1.0-1.1 (25-28) +/- 0.1 (3) |
| Liner | 6.9 (175) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Value | Dimensional Stability (%) |
|---|---|
| No Shrinkage Observed |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Test Method: 3 day water immersion plus 24 hr. recovery vs. 72 hr. at RT on SS panel (24 hr. dwell time on SS panel before immersion)
| Value | Chemical Resistance |
|---|---|
| Isopropyl Alcohol | No visual change, 20% adhesion loss |
| Acetic Acid (5%) | No visual change or adhesion loss |
| Oil (SAE 10W-40) | No visual change or adhesion loss |
| Gasoline | Edge penetration, 50% adhesion loss |
| Toluene | Film deterioration & complete adhesion loss |
Test Method: ASTM D 896 (Modified for number of cycles and cycle time)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Acrylic Powder Paint on Metal | 59 | (649) |
| Epoxy Powder Paint on Metal | 70 | (770) |
| Polyester Powder Paint | 32 | (352) |
| Polyurethane Powder Paint on Metal | 72 | (792) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Physical Properties | Water Immersion 3 day water immersion: No visual change or adhesion loss | |
| Expected Shear | Room Temp (hours): 25 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack (gm/sq cm) | 300 | ASTM D 2979 |
| Expected Exterior Life | Five to seven years, mid North America | |
| Service Temperature Range | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Roll to Sheet,Sheet Form |
| Double Face | N |
| Film Family | Vinyl |
| Master Web Width | 60.000 |
| Other Available Widths | 48.00,54.00,65.00 |
| Print Technology | Solvent Screen,UV Screen,Solvent Inkjet,UV Inkjet - Wide |
| Quilon | N |
| Remoist | N |
| Surface Type | Metal,Paint,Powder Coated Paint |
| Surface Treatment | N/A |
| Surface Texture | Smooth,Rough |
| Surface Profile | Compound Curve,Flat,Rigid |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| PLV/54 | R | N/A | N | 54 | 0 | 6 | - | X | - | - |
| PLV/60 | R | N/A | N | 60 | 0 | 6 | X | X | - | - |
| PLVS1A | S | 250 | Y | 27 | 38 | 0 | - | - | - | X |
Please log in to view sales figures.
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
Modified on: