FLX070057

Flexcon® OptiFlex® PP 200 H CLEAR TC-458 V-32 TracRite™ 120 (.55-.65)

Primary and Secondary Labeling Clear Polypropylene

Home Technical Data and Details Availability

Benefits

  • Adhesive offers excellent tack, clarity and wet out characteristics

Click to view PDF

Contact: +1 508 885 8200

Features

  • Topcoated 2.0 mil clear polypropylene (BOPP) offers excellent resistance to shrinkage, high-temperature pasteurization, moisture, humidity, and product contents
  • Film clarity is ideal for achieving the no-label-look
  • Polypropylene is more economical and conformable than polyester and provides a good diecutting base
  • Excellent surface smoothness allows for optimum ink laydown
  • Backed with Flexcon® TracRite™ 120 polyester release liner for excellent on-press performance for tight registration graphics
  • Release liner provides a good diecutting base and allows for high-speed dispensing
  • High-performance permanent acrylic adhesive provides a good bond to low- and high-surface energy plastics, and glass for reliable performance in extreme cold temperatures
  • Film conformability for rigid containers provides maximum label and graphic coverage
  • Topcoat optimizes printability with solvent and water flexo, UV inkjet - (Xeikon Jetrion 4000 series and Domino) Narrow, UV offset, UV Flexo, hot stamping, UV letterpress and UV screen

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10 %51
Adhesive 0.55-0.65 +/- 0.114-17 +/- 3
Liner1.2 +/- 10 %30

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel36396
Acrylic44484
Glass39429
Polypropylene666
Polyester43473

Test Method: ASTM D 903 (Modified for 72 hr dwell time)

Additional PropertiesValueTest Method
Expected Shear100ASTM D 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack480ASTM D 2979
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyHot Stamping, Flexographic - Solvent, Flexographic - UV, Letterpress - UV, Inkjet - UV Narrow Format, Screen - UV, Flexographic - Water, Offset - UV
Surface TypeHDPE, HSE Plastic, LSE Plastic, Polypropylene, Metal, Paint, PET, Aluminum, Stainless Steel, Glass
Surface TreatmentFlame Treat, Condensation, Ink, Mold Release Agent, Corona Treat
Surface TextureFrosted, Smooth, Rough
Surface ProfileRecess, Rigid, Single Curve, Concave, Compound Curve, Convex, Flat, Flexible

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.