FLX069872
All narrow-format UV inkjet systems are different; therefore, we recommend "fit-for-use" testing. For laser diecutability, please check with your equipment manufacturer. *Lysol® is a registered trademark of Reckitt Benckiser LLC. Please Note: MedFlex® Plus is not intended for direct skin contact nor for implantable devices. For skin contact applications, please contact Flexcon at 508.885.8296 for information on our Flexcon® DermaFlex™ product line. “Fit-for-use” testing is recommended under actual application conditions.
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| MTC & Film | 2.1 (53) +/- 10% |
| Adhesive | 0.8-0.9 (20-23) +/- 0.1 (3) |
| Liner | 3.1 (79) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Value | Dimensional Stability (%) |
|---|---|
| No Shrinkage Observed |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| ABS | 60 | (660) |
| Acrylic | 74 | (814) |
| Acrylic Powder Paint | 59 | (649) |
| Aluminum | 54 | (594) |
| Epoxy Powder Paint | 67 | (737) |
| Glass | 66 | (726) |
| HDPE | 32 | (352) |
| Painted Metal | 57 | (627) |
| Polycarbonate | 58 | (638) |
| Polyester | 87 | (957) |
| Polyester Powder Paint | 55 | (605) |
| Polypropylene | 8 | (88) |
| Polyurethane Powder Paint | 72 | (792) |
| Stainless Steel | 70 | (770) |
| Styrene | 54 | (594) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 30 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack (gm/sq cm) | 1030 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Service Temperature Range | -40°F to 302°F (-40°C to 150°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | UL Recognized |
| Color Family | White |
| Converting | Roll Form |
| Double Face | 0 |
| Film Family | Polyester |
| Master Web Width | 60.000 |
| Other Available Widths | N/A |
| Print Technology | Continuous Laser,Conventional Offset,Solvent Flexo,Solvent Screen,Thermal Transfer,UV Flexo,UV Inkjet - Narrow,UV Letterpress,UV Offset,UV Screen,Water Flexo |
| Quilon | 0 |
| Remoist | 0 |
| Surface Type | ABS,Aluminum,Fiberglass,Glass,HDPE,HSE Plastic,LSE Plastic,Metal,Paint,Paint (non-vinyl based),PET,Polycarbonate,Polypropylene,Powder Coated Paint,PVC,Stainless Steel,Steel,Styrene,TPO Plastic |
| Surface Treatment | N/A |
| Surface Texture | Frosted,Rough,Smooth |
| Surface Profile | Flat,Rigid |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| MD722WM | R | N/A | N | 60 | 0 | 6 | X | X | - | - |
Please log in to view sales figures.
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
Modified on: