FLX069798

Flexcon® DPM Aply® 4WVSAE (V 400 F White L-344 90 PFW Air Egress - UL Rec)

Consumer Durables: Print-Receptive White Vinyl Air Egress Sheet Form Liner

Home Technical Data and Details Availability

Benefits

  • CUL Recognized, L- Adhesives, UL Recognized

Click to view PDF

Contact: +1 508 885 8200

Features

  • Print-receptive 4.0 mil white flexible vinyl provides consistent surface smoothness, excellent dimensional stability, and conformability
  • Printable via thermal transfer, UV and solvent screen, UV, solvent & water flexo, and narrow-format UV inkjet
  • In most cases, corona treatment is not required
  • Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
  • High shear and high peel adhesive resists cold flow and oozing
  • 90 lb. embossed liner creates air egress channels in the adhesive to eliminate bubbles and wrinkles during application process and post application process
  • Liner is ideal for roll-to-sheet and sheet-form converting on most narrow-format presses

Additional Details

All narrow-format UV inkjet systems are different; therefore, we recommend "fit-for-use" testing. Please note: DPM Aply® with air egress liner is available for sale in North America only. Due to the custom nature of this product, the data presented are based on three or less production runs.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 3.4 +/- 10%86
Adhesive 1.0-1.1 +/- 0.125-28 +/- 3
Liner6.8 +/- 10%172

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD 0.5
TD 0.5

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic59649
Stainless Steel54594
Glass55605
Polypropylene40440
Polyethylene28308

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear3ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack500ASTM D 2979
Expected Exterior LifeFive years based on 2000 hours Xenon arc testing
Additional Information
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyCUL_CUL Recognized, UL_UL Recognized
Color FamilyWhite
ConvertingN/A
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - Solvent, Flexographic - UV, Flexographic - Water, Screen - Solvent, Screen - UV, Inkjet - UV Narrow Format
Surface TypeN/A
Surface TreatmentN/A
Surface TextureSmooth
Surface ProfileN/A

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.