FLX069592

Flexcon® OptiFlex® Thin EcoFocus® 069592 (PE 220 F CLEAR V-127RE TRACRITE 92)

2.2 mil clear polyethylene for packaging label solutions -  Enabling Recyclability of HDPE Containers

Home Technical Data and Details Availability

Benefits

  • Association of Plastic Recyclers (APR)
  • Product has been 3rd party tested for Higher Pressure Processing (HPP) and adhesive was found to have the necessary strength and compatibility to withstand the HPP conditions
  • Release liner provides a good diecutting base and allows for high-speed dispensing

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.2 mil clear polyethylene offers superior film conformability for maximum label and graphic coverage
  • Print-receptive film provides uniform and consistent printability via rotary letterpress, rotary screen, HP Indigo, narrow-format UV inkjet and flexography (in-line corona treatment recommended to enhance print receptivity)
  • Polyethylene film offers good resistance to a variety of environments, including the shower where moisture and humidity are present
  • High-performance adhesive adheres well to HDPE containers
  • V-127RE adhesive is compatible with the HDPE recycling process allowing for the collection of rHDPE
  • Adhesive complies with FDA 175.105 for indirect food contact
  • Backed with a Flexcon® TracRite™ 92 polyester release liner for excellent on-press performance for tight-registration graphics

Additional Details

APR Critical Guidance Recognition - Flexcon's undecorated OptiFlex® Thin EcoFocus® PE 220 F Clear pressure-sensitive labels, with V-127RE adhesive meet or exceed APR's Critical Guidance Protocol for HDPE Colored or Natural Bottles with Resin Additives, Barriers, Labels or Closures, HDPE-CG-01.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.2 +/- 10%56
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner0.92 +/- 5%23

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Glass48528
HDPE19209
Polypropylene29319
Stainless Steel51561

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear10ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack570ASTM D 2979
Additional Information
Service Temperature -40ºF to 176ºF (-40ºC to 80ºC)
Minimum Application Temperature 35°F (1.7°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyAssociation of Plastic Recyclers (APR)
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyScreen - UV, Letterpress - UV, Inkjet - UV Narrow Format, Flexographic - UV
Surface TypeHSE Plastic, Aluminum, Glass, LSE Plastic, HDPE
Surface TreatmentFlame Treat, Corona Treat, Mold Release Agent
Surface TextureSmooth
Surface ProfileConvex, Flat, Recess, Concave, Single Curve, Compound Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.