FLX069589

Flexcon® OptiFlex® Thin EcoFocus® 069589 (PP 160 H WHITE TC-458 V-52RE TRACRITE 92)

Topcoated 1.6 mil hard white polypropylene wash-off adhesive for packaging label solutions. Enabling Recycling of PET Containers.

Home Technical Data and Details Availability

Benefits

  • Product has been 3rd party tested for Higher Pressure Processing (HPP) and adhesive was found to have the necessary strength and compatibility to withstand the HPP conditions
  • Film clarity is ideal for achieving the no-label look
  • Backed with a Flexcon® TracRite™ 92 polyester release liner for excellent on-press performance for tight-registration graphics
  • Release liner provides a good diecutting base and allows for high-speed dispensing

Click to view PDF

Contact: +1 508 885 8200

Features

PP 160 H WHITE TC-458 V-52RE TRACrite™ 92 

  • Topcoated 1.6 mil hard clear polypropylene (BOPP) offers excellent resistance to shrinkage, moisture, humidity and product contents
  • Excellent surface smoothness allows for optimum ink laydown
  • Printable via UV, solvent & water flexo, narrow-format UV inkjet, roll-form dry toner, UV rotary screen, UV letterpress and hot stamping
  • High-performance adhesive adheres well to PET containers
  • Adhesive separates cleanly from PET flake during the recycling process allowing for the collection of rPET

Additional Details

APR Critical Guidance Recognition - Flexcon's undecorated OptiFlex® Thin EcoFocus® PP 160 H White TC pressure-sensitive labels, with V-52RE adhesive meet or exceed APR's Critical Guidance Protocol for Clear PET Articles with Labels and Closures.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 1.6 +/- 10%44
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner0.92 +/- 5%23

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel23253
Polyester23253
Glass22242

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear10ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack500ASTM D 2979
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 20°F (-6.6°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyAssociation of Plastic Recyclers (APR)
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - Water, Screen - UV, Letterpress - UV, Flexographic - Solvent, Hot Stamping, Flexographic - UV, Inkjet - UV Narrow Format, Offset - UV
Surface TypePET
Surface TreatmentFlame Treat, Corona Treat, Mold Release Agent
Surface TextureSmooth
Surface ProfileCompound Curve, Concave, Flat, Convex, Recess, Rigid

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.