FLX006934
Please note: Our combination of flexible substrates and skin-friendly adhesives form a product portfolio that is suitable for a variety of applications. Choose from existing products, or work with our Technical Service team to create your own unique combination that’s optimized for your specific application needs.*Biocompatibility testing was completed using a similar ‘source’ adhesive in some circumstances. Full biocompatibility results are available on the web and upon request.
For guidance only, not to be used for setting specifications. The data presented are based on three or less production runs.
DISCLAIMER: FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE. This product is a device component intended solely for further processing, manufacturing, or incorporation into a finished device, and is further intended only for use as a device component on intact skin (i.e., not intended for use in the presence of open sores or wounds nor for applications inside the body). Customer is solely responsible for determining whether this component product is fit for Customer’s intended use, including, without limitation, incorporation into Customer’s finished device(s), and for performing any additional testing that may be necessary to support Customer’s intended use. Customer is solely responsible for ensuring that its use of the component product is in compliance with the applicable laws and for obtaining any necessary clearances or approvals from its use of the component product and any finished device that incorporates the component product.
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| Film | 125.0 (3175) +/- 15% |
| Adhesive | 1.0-1.1 (25-28) +/- 0.1 (3) |
| Liner | 3.1 (79) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Acrylic | 40+ | (440+) foam rips |
| Glass | 40+ | (440+) foam rips |
| Polypropylene | 5 | (55) |
| Stainless Steel | 40+ | (440+) foam rips |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 2.0+ foam rips | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack (gm/sq cm) | 460 | ASTM D 2979 |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Skin Contact |
| Product Agency | ISO 10993 |
| Color Family | None |
| Converting | N/A |
| Double Face | N |
| Film Family | None |
| Master Web Width | 60.000 |
| Other Available Widths | 60.00 |
| Print Technology | N/A |
| Quilon | N |
| Remoist | N |
| Surface Type | N/A |
| Surface Treatment | N/A |
| Surface Texture | N/A |
| Surface Profile | N/A |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| SPEF08-60 | R | N/A | N | 58 | 1400 | 3 | X | - | - | - |
Please log in to view sales figures.
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
Modified on: