FLX068983

Flexcon® Omni-Wave™ TT 200 Black H-502 150 Poly H-9 44PP-8

Skin Contact Applications: Electrodes & Wearables Hydrogel-Free Bio-Signal Sensing Transfer Tape

Benefits

  • H-502 hydrogel-free skin contact adhesive (transfer tape) engineered for short-term wear (3 days) for medical device attachment (electrodes or sensors) demonstrates minimal skin irritation as compared to hydrogel electrodes
  • Product performance is not affected by humidity
  • Patented Flexcon® Omni-Wave™ technology
  • Association for Advancement of Medical Instrumentation (AAMI) compliant
  • Passes ISO 10993-10 (biological evaluation of medical devices) for sensitization and irritation

Contact: +1 508 885 8200

Features

  • 2.0 mil black transfer adhesive
  • Hydrogel-free skin contact adhesive (transfer tape) engineered for short-term wear (3 days) for medical device attachment (electrodes or sensors) demonstrates minimal skin irritation as compared to hydrogel electrodes
  • Conductive adhesive layer allows electronics to send and receive waveform signals between the connected surfaces
  • Product performance is not affected by humidity
  • 1.5 mil ultra-smooth polyester release liner provides ultimate smoothness and flow-out of adhesive, and is ideal for roll-form converting
  • 44 lb. polycoated natural Kraft release liner ideal for roll-form converting

Additional Details

DISCLAIMER: FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE. This product is a device component intended solely for further processing, manufacturing, or incorporation into a finished device, and is further intended only for use as a device component on intact skin (i.e., not intended for use in the presence of open sores or wounds nor for applications inside the body). Customer is solely responsible for determining whether this component product is fit for Customer’s intended use, including, without limitation, incorporation into Customer’s finished device(s), and for performing any additional testing that may be necessary to support Customer’s intended use. Customer is solely responsible for ensuring that its use of the component product is in compliance with the applicable laws and for obtaining any necessary clearances or approvals from its use of the component product and any finished device that incorporates the component product.

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon. Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film
Adhesive 2.0-2.2 +/- 0.151-56 +/- 3
Liner3.0 +/- 10%76

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Test Method:

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel13143

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear2ASTM D 3654 Method A (1 hr. dwell, 1 sq. in. surface, 4 lb. load)
Tack340ASTM D 2979
Additional Information Electrical Properties: Z-Direction Resistance Less than 20 Ohms/in², Surface Resistivity: Less than 200 Ohms/square
Service Temperature
Minimum Application Temperature
Storage StabilityThree years stored at 73°F (23°C) and 50% relative humidity in the original packaging

Product Details

TitleDescription
AdhesiveSkin Contact
Product AgencyISO 10993
Color FamilyBlack
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyN/A
Surface TypeN/A
Surface TreatmentN/A
Surface TextureN/A
Surface ProfileN/A

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.