FLX068347
For guidance only - the data represented are based on three or less production runs.
DISCLAIMER: FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE. This product is a device component intended solely for further processing, manufacturing, or incorporation into a finished device. Customer is solely responsible for determining whether this component product is fit for Customer’s intended use, including, without limitation, incorporation into Customer’s finished device(s), and for performing any additional testing that may be necessary to support Customer’s intended use. Customer is solely responsible for ensuring that its use of the component product is in compliance with the applicable laws and for obtaining any necessary clearances or approvals from its use of the component product and any finished device that incorporates the component product. Full flame-retardant test results are available upon request.
Contact: +1 508 885 8200
Value | Thickness (Mils[microns]) |
---|---|
Film | 2.0 (51) +/- 10% |
Adhesive | 1.9-2.1 (48-53) +/- 0.1 (3) |
Liner | 3.1 (79) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
Value | Dimensional Stability (%) |
---|---|
No Shrinkage Observed |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
Ultimate Peel from | Average Oz/In | (N/m) |
---|---|---|
Acrylic | 75 | (825) |
Glass | 60 | (660) |
Polyethylene | 19 | (209) |
Polypropylene | 2 | (22) |
Stainless Steel | 54 | (594) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
Property | Value | Test Method |
---|---|---|
Expected Shear | Room Temp (hours): 100 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
Tack (gm/sq cm) | 980 | ASTM D 2979 |
Flammability | See other side for information | |
Expected Exterior Life | Two years | |
Service Temperature Range | -40°F to 302°F (-40°C to 150°C) | |
Minimum Application Temperature | 50°F (10°C) | |
Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity |
Title | Description |
---|---|
Adhesive | Permanent |
Product Agency | UL Recognized,FAR 25.853(a)(a)(i): 60 sec burn,FAR 25.853(a)(a)(ii): 12 sec burn,FAR 25.853(d)(iv): Heat Release,FAR 25.853(v): Smoke Density,FMVSS 302,BSS 7239: Drager Tube Toxicity |
Color Family | Amber |
Converting | Roll Form,Roll to Sheet |
Double Face | 0 |
Film Family | Polyimide |
Master Web Width | 60.000 |
Other Available Widths | N/A |
Print Technology | N/A |
Quilon | N |
Remoist | N |
Surface Type | ABS,ABS Textured,Aluminum,HDPE,PET,Polycarbonate,Polypropylene,Stainless Steel |
Surface Treatment | N/A |
Surface Texture | Frosted,Rough,Smooth |
Surface Profile | Concave,Convex,Flat,Recess,Rigid,Single Curve |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Please log in to view sales figures.
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
Modified on: