FLX067002
All narrow-format water-based inkjet systems are different; therefore, we recommend "fit-for-use" testing.For laser diecutability, please check with your equipment manufacturer.
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| Film | 3.0 (76) +/- 10% |
| Adhesive | 0.8-0.9 (20-23) +/- 0.1 (3) |
| Liner | 3.1 (79) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Value | Dimensional Stability (%) |
|---|---|
| MD | 0.25 |
| TD | 0.25 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| ABS | 57 | (627) |
| Acrylic | 75 | (825) |
| Acrylic Powder Paint | 64 | (704) |
| Alkyd Enamel | 67 | (737) |
| Aluminum | 62 | (682) |
| Epoxy Powder Paint | 66 | (726) |
| Fiberglass | 49 | (539) |
| Glass | 70 | (770) |
| HDPE | 25 | (275) |
| Paper | 7 | (77) |
| Polyester Powder Paint | 60 | (660) |
| Polypropylene | 25 | (275) |
| Polyurethane Powder Paint | 59 | (649) |
| Stainless Steel | 67 | (737) |
| Styrene | 50 | (550) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 5 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack (gm/sq cm) | 880 | ASTM D 2979 |
| Expected Exterior Life | Indoor use only | |
| Service Temperature Range | -40°F to 212°F (-40°C to 100°C) | |
| Minimum Application Temperature | 32°F (0°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Roll Form |
| Double Face | 0 |
| Film Family | Polyester |
| Master Web Width | 60.000 |
| Other Available Widths | N/A |
| Print Technology | Waterbased Inkjet - Narrow |
| Quilon | 0 |
| Remoist | 0 |
| Surface Type | Glass,HDPE,HSE Plastic,LSE Plastic,Metal,Paint,PET,Polypropylene,PVC,Styrene |
| Surface Treatment | Corona Treat,Flame Treat,Ink,Mold Release Agent |
| Surface Texture | Frosted,Smooth |
| Surface Profile | Concave,Convex,Flat,Recess,Rigid |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Please log in to view sales figures.
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
Modified on: