FLX064278

Flexcon® OptiFlex® MPP20416 2.0 MIL SILVER PP, TC, V-01 ADH, 40K-8

Primary and Secondary Labeling Silver Polypropylene

Home Technical Data and Details Availability

Benefits

  • Adhesive complies with FDA 175.105 for indirect food contact
  • Excellent surface smoothness allows for optimum ink laydown

Click to view PDF

Contact: +1 508 885 8200

Features

Applications: Rigid Container Labels and Semi-Squeeze Container Labels

  • 2.0 mil hard silver polypropylene (BOPP) offers resistance to shrinkage, moisture, and humidity
  • Polypropylene is more economical and conformable than polyester and provides a good diecutting base
  • Printable via UV, solvent & water flexo, UV inkjet (Jetrion 4000 series), UV screen, UV letterpress, and hot stamping
  • V-01 high-performance, permanent acrylic adhesive adheres to a wide range of container types including low-surface energy HDPE
  • Backed with a 40 lb. bleached kraft release liner ideal for roll-form converting
  • Product has been 3rd party tested for Higher Pressure Processing (HPP) and adhesive was found to have the necessary strength and compatibility to withstand the HPP conditions
  • Order custom widths without purchasing a whole master through Flexcon® FlexChoice™ for Prime Label

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/10%51
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner2.5 +/- 10%64

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel54594
Acrylic54594
Glass40440
Polypropylene23253
Styrene41451

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear10ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load
Tack790ASTM D 2979
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 35°F (1.7°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilySilver
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyScreen - UV, Flexographic - Water, Hot Stamping, Flexographic - UV, Inkjet - UV Narrow Format, Letterpress - UV, Offset - UV, Flexographic - Solvent
Surface TypePET, Polypropylene, PVC, Styrene, Glass, HDPE, HSE Plastic, Metal, Paint, LSE Plastic
Surface TreatmentCorona Treat, Flame Treat, Ink, Mold Release Agent
Surface TextureSmooth, Frosted
Surface ProfileConcave, Convex, Flat, Recess, Rigid, Compound Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.