FLX059984
For Inkjet Printing: • Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| Film | 3.5 (89) +/- 10% |
| Adhesive | 0.9-1.0 (23-25) +/- 0.1 (3) |
| Liner | 6.9 (175) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Value | Dimensional Stability (%) |
|---|---|
| MD | 0.75 |
| TD | 0.75 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| ABS | 62 | (682) |
| Acrylic Powder Paint | 72 | (792) |
| Aluminum | 66 | (726) |
| Formica | 45 | (495) |
| Glass | 64 | (704) |
| Painted Metal | 70 | (770) |
| Painted Wood | 29 | (319) |
| Polycarbonate | 69 | (759) |
| Polypropylene | 24 | (264) |
| Sintra | 54 | (574) |
| Smooth Painted (non-vinyl) Wallboard | 48 | (528) |
| Stainless Steel | 70 | (770) |
| Styrene | 59 | (649) |
| Varnished Wood | 40 | (440) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 15 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack (gm/sq cm) | 750 | ASTM D 2979 |
| Flammability | Contact Tech Service at 508-885-8263 | |
| Expected Exterior Life | Two years | |
| Service Temperature Range | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Sheet Form,Roll to Sheet |
| Double Face | 0 |
| Film Family | Vinyl |
| Master Web Width | 54.000 |
| Other Available Widths | 60.00 |
| Print Technology | UV Inkjet - Wide,UV Offset,UV Screen,Solvent Inkjet,Solvent Screen,HP Latex |
| Quilon | N |
| Remoist | 0 |
| Surface Type | Ceramic,Glass,Polypropylene,Powder Coated Paint,Sintra,Some Ceramic Tile,Styrene,Varnished Wood,Lumber/Wood,Melamine (Formica),Metal,Paint,Painted Wallboard,Flexible Magnet,HDPE |
| Surface Treatment | Corona Treat,Non-vinyl Based Paint,Varnish |
| Surface Texture | Smooth |
| Surface Profile | Flat,Rigid |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| WP | R | N/A | N | 54 | 0 | 6 | X | X | X | - |
| WP-AB | R | N/A | Y | 54 | 150 | 3 | X | X | X | X |
| WP-AC | R | N/A | Y | 60 | 150 | 3 | X | - | X | - |
| WP-B | R | N/A | Y | 54 | 300 | 3 | X | - | - | X |
| WP-BB | R | N/A | Y | 60 | 300 | 3 | X | - | X | - |
| WP/6 | R | N/A | N | 60 | 1 | 6 | X | X | X | - |
Please log in to view sales figures.
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
Modified on: