FLX059980
Promotional Advertising: Clear Vinyl - Permanent
Contact: +1 508 885 8200
V 400 H CLEAR V-344 90 PFW SPECIAL
FlexMark® CP with FlexMark® CR, FlexMark® CRT, FlexMark® WR, FlexMark® WRT, or FlexMark® WRAE has been investigated by Underwriters Laboratories, Inc., and when used as a system, is in accordance with UL 410, the Standard for Floor Surfaces, for Floor-Graphic Materials (FGM).
Please refer to Flexcon's Warranty & Limited Remedy Policy for Graphic Advertising for Floors and Indoor Carpets, and Application and Removal Instructions. Nothing contained herein shall expand the Floors and Indoor Carpets Limited Warranty or otherwise be construed as a warranty or guarantee.
For Inkjet Printing:
• Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Film | 4.0 +/- 10% | 102 |
| Adhesive | 0.9-1.0 +/- 0.1 | |
| Liner | 6.9 +/- 10% | 175 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.75 |
| TD | 0.5 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 87 | 957 |
| Glass | 96 | 1054 |
| Aluminum | 73 | 803 |
| Polypropylene | 43 | 473 |
| Styrene | 73 | 803 |
Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear | 15 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack | 1000 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | ||
| Service Temperature | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | UL_UL Recognized |
| Color Family | Clear |
| Converting | Sheet Form |
| Film Family | N/A |
| Master Web Width | 60 |
| Other Available Widths | 54 |
| Print Technology | Offset - UV, Screen - UV, Inkjet - HP Latex, Inkjet - UV Wide Format, Screen - Solvent, Inkjet - Solvent |
| Surface Type | Ceramic, Ceramic Tile (some), Flexible Magnet, Glass, HDPE, Lumber/Wood, Melamine (Formica), Metal, Paint, Painted Wallboard, Varnished Wood, Sintra, Styrene, Polypropylene |
| Surface Treatment | Varnish, Non-vinyl Based Paint, Corona Treat |
| Surface Texture | Smooth |
| Surface Profile | Rigid, Flat |
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| 1025610 | Roll | 1 | Y | 54 | 150 | 3 | X | X | X | - |
| 1025611 | Roll | 1 | Y | 54 | 300 | 3 | X | X | - | - |
| 1025613 | Roll | 1 | Y | 60 | 300 | 3 | X | - | - | - |
| 1032727 | Sheet | 250 | Y | 27 | 38 | - | X | - | X |
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.