FLX059554

Flexcon® OptiFlex® Conceal™ PPM 230 H White TC-332™ V-344 Special 40K-8

Primary and Secondary Labeling White Opaque Polypropylene Specially Designed to Cover Up Existing Graphics

Home Technical Data and Details Availability

Benefits

  • Film provides excellent resistance to shrinkage, moisture, humidity and product contents

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.3 mil hard white opaque polypropylene (BOPP) metallized on one side for covering up pre-existing graphics
  • Film can be either applied to the container or to the direct screen printed container
  • Topcoat optimizes printability with flexographic, rotary screen, rotary letterpress inks and hot stamping
  • High-performance, aggressive permanent acrylic adhesive with excellent wet-out characteristics
  • V-344 adhesive adheres to a wide range of container types including low-surface HDPE, and printed graphics
  • 40 lb. bleached white kraft release liner ideal for roll-form converting

Additional Details

Recommendations: "Fit-for-use" testing is recommended under actual application conditions.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.3 +/- 10 %58
Adhesive 0.7-0.8 +/- 0.118-20 +/- 3
Liner2.5 +/- 10 %64

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel44484
Acrylic51561
Glass47517
Polypropylene14154

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear75ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack850ASTM D 2979
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyN/A
Surface TypeN/A
Surface TreatmentN/A
Surface TextureN/A
Surface ProfileN/A

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.