FLX056723

OptiFlex® Thin WPP16419 1.6 Mil White Polypropylene, TC, V-01 Adhesive, .92 Mil Poly Liner

Primary and Secondary Labels White Polypropylene Rigid Container Labeling Semi-Squeeze Container Labeling

Benefits

  • Adhesive complies with FDA 175.105 for indirect food contact
  • Offers a 30% reduction over the traditional 2.3 mil polypropylene

Contact: +1 508 885 8200

Features

  • "Greener" down-gauged 1.6 mil high-gloss, hard white polypropylene (BOPP) has excellent surface smoothness, and offers excellent resistance to shrinkage, moisture, humidity and product contents
  • Film opacity is ideal for achieving high impact graphics, and the no label look on white containers
  • Printable via UV, solvent & water flexo, UV offset, UV screen, UV letterpress, and hot stamping
  • V-01 high-performance, permanent acrylic adhesive adheres to a wide range of container types including low-surface energy HDPE
  • Backed with a Flexcon® TracRite™ 92 polyester release liner for excellent on-press performance for tight-registration graphics
  • Release liner provides a good diecutting base and allows for high-speed dispensing
  • Product has been 3rd party tested for Higher Pressure Processing (HPP) and adhesive was found to have the necessary strength and compatibility to withstand the HPP conditions

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 1.6 +/- 10%44
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner0.92 +/- 5%23

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel57627
Acrylic52572
Glass64704
Polypropylene22242
Styrene38418

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear10 (permanent adhesive)ASTM 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack720ASTM D 2979
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 35°F (1.7°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width76
Other Available WidthsN/A
Print TechnologyOffset - UV, Flexographic - UV, Letterpress - UV, Screen - UV, Flexographic - Water, Flexographic - Solvent, Hot Stamping
Surface TypePolypropylene, PVC, Styrene, HSE Plastic, LSE Plastic, Metal, Paint, Glass, HDPE
Surface TreatmentFlame Treat, Mold Release Agent, Corona Treat
Surface TextureRough, Smooth, Frosted
Surface ProfileConvex, Flat, Recess, Rigid, Single Curve, Concave

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.