FLX056721

Flexcon® OptiFlex® MPP20413 2.0 MIL Silver Polypropylene, TC, V-01 ADH, 1.2 MIL Polyester Liner

Primary and Secondary Labeling Silver Polypropylene

Home Technical Data and Details Availability

Benefits

  • Adhesive complies with FDA 175.105 for indirect food contact

Click to view PDF

Contact: +1 508 885 8200

Features

  • Topcoated 2.0 mil hard silver polypropylene (BOPP) offers resistance to shrinkage, moisture, and humidity
  • Polypropylene is more economical and conformable than polyester and provides a good diecutting base
  • Excellent surface smoothness allows for optimum ink laydown
  • Printable via UV, solvent & water flexo, UV inkjet (Xeikon Jetrion 4000 series and Domino), UV screen, UV letterpress, and hot stamping
  • V-01 high-performance, permanent acrylic adhesive adheres to a wide range of container types including low-surface energy HDPE
  • Backed with Flexcon® TracRite™ 120 polyester release liner for excellent on-press performance for tight registration graphics
  • Release liner provides a good diecutting base and allows for high-speed dispensing
  • Product has been 3rd party tested for Higher Pressure Processing (HPP) and adhesive was found to have the necessary strength and compatibility to withstand the HPP conditions
  • Order custom widths without purchasing a whole master through Flexcon® FlexChoice™ for Packaging

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/10%51
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner1.2 +/- 5%30

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel54594
Acrylic54594
Glass40440
Polypropylene23253
Styrene41451

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear10ASTM 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load)
Tack790ASTM D 2979
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 35°F (1.7°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilySilver
ConvertingRoll Form
Film FamilyN/A
Master Web Width76
Other Available Widths60
Print TechnologyInkjet - UV Narrow Format, Letterpress - UV, Offset - UV, Screen - UV, Flexographic - Water, Flexographic - Solvent, Flexographic - UV, Hot Stamping
Surface TypeLSE Plastic, Metal, Paint, PET, Polypropylene, PVC, Styrene, HDPE, HSE Plastic, Glass
Surface TreatmentFlame Treat, Mold Release Agent, Corona Treat
Surface TextureRough, Smooth, Frosted
Surface ProfileFlat, Recess, Rigid, Concave, Convex, Compound Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.