FLX056456

Flexcon® OptiFlex® CPP20413

2 Mil Clear Polypropylene, TC, V-01 ADH. 1.2 Mil Poly Liner

Home Technical Data and Details Availability

Benefits

  • Adhesive complies with FDA 175.105 for indirect food contact

Click to view PDF

Contact: +1 508 885 8200

Features

  • Topcoated 1.85 mil hard clear polypropylene (BOPP) offers excellent resistance to shrinkage, moisture, humidity and product contents
  • Film clarity is ideal for achieving the no-label-look
  • Excellent surface smoothness allows for optimum ink laydown
  • High-performance, permanent acrylic adhesive adheres to a wide range of container types including low-surface energy HDPE


Additional Details

  • Product has been 3rd party tested for Higher Pressure Processing (HPP) and adhesive was found to have the necessary strength and compatibility to withstand the HPP conditions

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10%51
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner1.2 +/- 5 %30

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel54594
Acrylic54594
Glass40440
Polypropylene23253
Styrene41451

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear10ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack790ASTM D 2979
Additional Information
Service Temperature -40°F to 212°F (-40°C to 100°C)
Minimum Application Temperature 35°F (1.7°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width76
Other Available Widths60
Print TechnologyFlexographic - UV, Letterpress - UV, Hot Stamping, Inkjet - UV Narrow Format, Offset - UV, Screen - UV, Flexographic - Water, Flexographic - Solvent
Surface TypeStyrene, PET, Polypropylene, HSE Plastic, LSE Plastic, Metal, Glass, Paint, PVC, HDPE
Surface TreatmentMold Release Agent, Flame Treat, Ink, Corona Treat
Surface TextureRough, Smooth, Frosted
Surface ProfileRigid, Concave, Convex, Flat, Recess, Compound Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.