FLX000547

Flexcon® FlexMount® Select™ DF021621

Graphic Mounting Film: Clear Removable/Permanent with Double-Faced Release Liner

Home Technical Data and Details Availability

Benefits

  • Ideal for roll-form and roll-to-sheet converting

Click to view PDF

Contact: +1 508 885 8200

Features

  • 0.5 mil double-faced clear polyester carrier film
  • Clear removable pressure-sensitive acrylic adhesive on liner side, and an optically clear permanent pressure sensitive acrylic adhesive on the open side
  • Backed with an 80 lb. double-faced release liner

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 0.5 +/- 10%13
Adhesive Removable Adhesive 0.9-1.0 +/-23-25
Liner5.6 +/- 10%142

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Test Method:

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic (Perm)35385
Acrylic (Remove)19209
Glass (Perm)25275
Glass (Remove)18198
Polypropylene (Perm)777

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
TackTack (gm/sq cm) 310 Tack (gm/sq cm) (Permanent Adhesive) 660ASTM D 2979
Additional Information Room Temp (hours) (Permanent Adhesive) 100 Room Temp (hours) (Removable Adhesive) Erratic shear caused by removable adhesive
Service Temperature -20ºF to 302ºF (-29ºC to 150ºC)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesiveApplication Specific
Product AgencyN/A
Color FamilyClear
ConvertingRoll to Sheet
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyN/A
Surface TypeClosed-Cell Foam, Metal, Paint, Foamboard, LSE Plastic, HSE Plastic
Surface TreatmentInk
Surface TextureSmooth
Surface ProfileFlat, Rigid, Flexible

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.