FLX054112

Flexcon® ThermlFilm® NexGen™ 25120

2.0 Mil Gloss Topcoated Bright Brushed Silver Polyester, Permanent Adhesive, Roll-Form Liner

Home Technical Data and Details Availability

Benefits

  • 50 lb. bleached kraft release liner made from up to 30% post-consumer waste, ideal for roll form converting
  • Liner is suitable for optical sensing on most thermal transfer printers
  • UL recognized under UL 969 - UL File No. PGJI2.MH16635 Printing Materials - Component
  •  cUL recognized under UL File No. PGJI8.MH16635 - Printing Materials Certified for Canada - Component - under CAN/CSA standard C22.2, No. 0.15
  • CSA accepted under CSA File No. 99214

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil gloss topcoated silver polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
  • Bright brushed silver polyester provides a high-end appearance
  • Topcoat is more universally printable than other thermal transfer printable products
  • Printable via resin and wax/resin thermal transfer; UV & solvent screen; UV, solvent & water flexo; and UV inkjet
  • Permanent acrylic pressure-sensitive adhesive bonds well to low- and high-surface energy plastics, painted metal, powder-coated paint, polycarbonate and fiberglass
  • High shear and high peel adhesive resists cold flow and oozing
  • Adhesive bonds well to base film substrates
  • 50 lb. bleached kraft release liner made from up to 30% post-consumer waste, ideal for roll form converting
  • Liner is suitable for optical sensing on most thermal transfer printers

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10%51
Adhesive 0.8-0.9 +/- 0.1 (3)20-23
Liner3.1 +/- 10%79

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Acrylic77847
Glass68748
Stainless Steel55605
Polypropylene15165
Acrylic Powder Paint58638

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack1030ASTM D 2979
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% RH

Product Details

TitleDescription
AdhesivePermanent
Product AgencyCSA_CSA Acceptance, UL_UL PGJI2 Recognized Printed w/Jetrion 4000 Series, UL_UL Recognized, CUL_CUL Recognized
Color FamilyBright Brushed Stainless
ConvertingRoll Form
Film FamilyN/A
Master Web Width54
Other Available WidthsN/A
Print TechnologyInkjet - UV Narrow Format, Screen - UV, Flexographic - Water, Flexographic - UV, Flexographic - Solvent, Screen - Solvent, Hot Stamping
Surface TypePVC, Paint, PET, Metal, Foamboard, Glass, Fiberglass, Powder Coated Paint
Surface TreatmentFlame Treat
Surface TextureSmooth, Rough
Surface ProfileRigid, Single Curve, Recess, Convex, Flat, Concave

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.