FLX000443
1.5 Mil Silver Polyester, VOID Pattern, Permanent Adhesive, Paper Liner
Contact: +1 508 885 8200
*Quilon® is a registered trademark of Zaclon, LLC
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Film | 1.4 +/- 10% | 36 |
| Adhesive | 1.0-1.1 +/- 0.1 (3) | 25-28 |
| Liner | 3.1 +/- 10% | 79 |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Dimensional Stability (%) | Value |
|---|---|
| MD | No Shrinkage Observed |
| TD |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | This product shows tampering w | |
| Acrylic | This product shows tampering w | |
| Glass | This product shows tampering w |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear | 5 | ASTM 3654 Method A (1 hr dwell, 1 sq. in, 4 lb. load) |
| Tack | 820 | ASTM D 2979 |
| Additional Information | Not to be used for setting specifications. Due to the custom nature of this product, the data presented are based on three or less production runs. | |
| Service Temperature | -40°F to 302°F (-40°C to 150°C) Tamper-evident maximum 104°F (40°C) | |
| Minimum Application Temperature | 32°F (0°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | UL_UL Recognized |
| Color Family | Silver |
| Converting | Roll Form |
| Film Family | N/A |
| Master Web Width | 54 |
| Other Available Widths | N/A |
| Print Technology | Letterpress - UV, Offset - UV, Screen - UV, Flexographic - Solvent, Screen - Solvent, Flexographic - UV |
| Surface Type | PET, Polypropylene, HDPE, LSE Plastic, Glass, HSE Plastic |
| Surface Treatment | Varnish, Corona Treat, Ink, Flame Treat |
| Surface Texture | Smooth |
| Surface Profile | Rigid, Compound Curve, Flat |
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.