FLX000315

DPM® PWRTS 2 Mil Printable White PET High Performance Adhesive for Rough Textured Surfaces Roll Liner

Durable Goods and Equipment Labeling White Polyester for Rough Textured Surfaces - Roll Form

Home Technical Data and Details Availability

Benefits

  • UL recognized under UL 969 - UL File No. PGGU2.MH10170 Marking and Labeling System Materials - Component
  • cUL recognized under UL File No. PGGU8.MH10170 Marking and Labeling System Materials Certified for Canada - Component
  • CSA accepted under CSA File No. 99214

Click to view PDF

Contact: +1 508 885 8200

Features

  • 2.0 mil white polyester provides consistent surface smoothness, excellent dimensional stability and endurance to varying temperatures
  • Topcoated surface is compatible with most conventional and UV ink systems (we recommend evaluating the intended ink system for compatibility with the product under the application conditions)
  • Acrylic adhesive offers high initial tack, high shear, and high ultimate bond to a wide variety of rough textured surfaces, including low-surface energy plastics and painted metal
  • 50 lb. bleached kraft release liner offers good diecutability
  • Ideal for roll to roll converting

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10 %51
Adhesive 1.9-2.1 +/- 0.148-53 +/- 3
Liner3.1 +/- 10 %79

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel87957
Acrylic1221342
Glass1071177
Polypropylene36396

Test Method: ASTM D 903 (Modified for 72 hr. dwell time)

Additional PropertiesValueTest Method
Expected Shear75ASTM D 3654 Method A (1 hr. dwell, 1 sq. in, 4 lb. load)
Tack1650ASTM D 2979
Additional Information
Service Temperature -40°F to 302°F (-40°C to 150°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyCUL_CUL Recognized, UL_UL Recognized, CSA_CSA Acceptance
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyLetterpress - UV, Offset - UV, Flexographic - UV, Flexographic - Water, Flexographic - Solvent
Surface TypeFiberglass, Rubber, Paper/Fiber, Unsealed Concrete, Glass, Polycarbonate, Ceramic, Asphalt, Powder Coated Paint, Paint, Metal, HSE Plastic, LSE Plastic
Surface TreatmentCorona Treat, Dirt, Dust, Flame Treat, Frost, Ink, Mold Release Agent, Silicone, Moisture, Condensation, Slip Agent, Varnish, Oil
Surface TextureExtra Rough, Rough, Frosted, Smooth
Surface ProfileConvex, Recess, Concave, Flat, Single Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.