FLX030751

Flexcon® OptiFlex® Polyproylene 200 H Clear TC-458 A-208 TracRite™ 92

Primary and Secondary Labeling Clear Polypropylene

Home Technical Data and Details Availability

Benefits

  • Product has been 3rd party tested for Higher Pressure Processing (HPP) and adhesive was found to have the necessary strength and compatibility to withstand the HPP conditions

Click to view PDF

Contact: +1 508 885 8200

Features

  • Backed with Flexcon® TracRite™ 150 polyester release liner for excellent on-press performance for tight registration graphics
  • Release liner provides a good diecutting base and allows for high-speed dispensing
  • 2.0 mil clear polypropylene (BOPP) offers excellent resistance to shrinkage, moisture, humidity and product contents
  • Film clarity is ideal for achieving the no-label-look on glass
  • Film conformability for rigid containers provides maximum label and graphic coverage
  • Topcoat optimizes printability with solvent and water flexo, UV inkjet - (Xeikon Jetrion 4000 series and Domino) Narrow, UV offset, UV Flexo, hot stamping, UV letterpress and UV screen
  • Excellent surface smoothness allows for optimum ink laydown
  • Permanent pressure-sensitive acrylic adhesive bonds well to glass and high surface energy plastics without lifting, tunneling or flagging
  • Adhesive offers excellent tack, clarity and wet-out characteristics

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.0 +/- 10%51
Adhesive 0.5-0.6 +/- 0.113-15 +/- 3
Liner0.92 +/- 5%23

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD No shrinkage observed
TD

Test Method: On Al panel at 160°F (71°C) for 24 hr.

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Corona Treated HDPE25275
Glass34374
HDPE12132
Polyester31341
Polypropylene24264

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected Shear
Tack500ASTM D 2979
Additional Information
Service Temperature -40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesivePermanent
Product AgencyN/A
Color FamilyClear
ConvertingRoll Form
Film FamilyN/A
Master Web Width76
Other Available WidthsN/A
Print TechnologyFlexographic - Solvent, Hot Stamping, Inkjet - UV Narrow Format, Flexographic - Water, Screen - UV, Letterpress - UV, Offset - UV, Flexographic - UV
Surface TypeHSE Plastic, LSE Plastic, Glass
Surface TreatmentCondensation, Flame Treat, Frosted, Mold Release Agent, Moisture, Corona Treat
Surface TextureFrosted, Smooth
Surface ProfileConcave, Convex, Flat, Recess, Rigid, Compound Curve

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.