FLX000132
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| Film | 3.5 (89) +/- 10% |
| Adhesive | 1.0-1.1 (25-28) +/- 0.1 (3) |
| Liner | 6.9 (175) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Value | Dimensional Stability (%) |
|---|---|
| MD | LESSS1.0 |
| TD | LESSS1.0 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Value | Chemical Resistance |
|---|---|
| Water | Good |
| Gasoline | Fair |
| Basic Cleaners | Good |
| Toluene | Poor |
Test Method: ASTM D 896 (Modified for number of cycles and cycle time)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| ABS | 71 | (781) |
| Acrylic | 73 | (803) |
| Glass | 70 | (770) |
| HDPE | 27 | (297) |
| Painted Metal | 52 | (572) |
| Painted Wood | 22 | (242) |
| Polycarbonate | 76 | (836) |
| Polyester | 66 | (726) |
| Polypropylene | 32 | (352) |
| Sintra - Foam Board | 59 | (649) |
| Stained & Varnished Wood | 24 | (264) |
| Styrene | 70 | (770) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 10 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Expected Shear | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load | |
| Tack (gm/sq cm) | 370 | ASTM D 2979 |
| Expected Exterior Life | One year | |
| Service Temperature Range | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% RH |
| Title | Description |
|---|---|
| Adhesive | Permanent |
| Product Agency | N/A |
| Color Family | White |
| Converting | Sheet Form,Roll to Sheet |
| Double Face | N |
| Film Family | Vinyl |
| Master Web Width | 60.000 |
| Other Available Widths | N/A |
| Print Technology | Conventional Offset |
| Quilon | N |
| Remoist | N |
| Surface Type | Foamboard,LSE Plastic,HSE Plastic,Paint,Sintra |
| Surface Treatment | N/A |
| Surface Texture | Smooth |
| Surface Profile | Flat |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
Please log in to view sales figures.
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
Modified on: