FLX064832

Flexcon® FlexMark® WRAE

3.5 Mil White Opaque Vinyl, Permanent Adhesive, Air Egress Liner

Home Technical Data and Details Availability
Click to view PDF

Contact: +1 508 885 8200

Features

  • 3.5 mil white opaque vinyl provides excellent hiding power
  • Excellent printability via UV and solvent screen, UV and solvent inkjet, UV offset, and latex
  • High-performance removable adhesive bonds well to ABS, acrylic, aluminum, stainless steel, HDPE, painted metal, styrene, painted non-vinyl wallboard, glass, certain ceramic tile, sealed concrete, linoleum, and Formica®
  • Backed with a 90 lb. moisture stable polycoated layflat release air-egress liner ideal for roll-to-sheet or sheet-form converting

Additional Details

FlexMark® WRAE with FlexMark® CP or FlexMark® OV6602 has been investigated by Underwriters Laboratories, Inc., and when used as a system, is in accordance with UL 410, the Standard for Floor Surfaces, for Floor-Graphic Materials (FGM).

Please refer to Flexcon's Warranty & Limited Remedy Policy for Graphic Advertising for Floors and Indoor Carpets, and Application and Removal Instructions. Nothing contained herein shall expand the Floors and Indoor Carpets Limited Warranty or otherwise be construed as a warranty or guarantee.

Formica® is a registered trademark of the Diller Corp.

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 3.5 +/- 10%89
Adhesive 0.8-0.9 +/- 0.120-23 +/- 3
Liner6.9 +/- 10%175

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD 0.75
TD 0.5

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
ABS17187
Aluminum17187
Ceramic Tile22242
Glass19209
Stainless Steel22242

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected ShearRoom Temp (hours): Erratic shear due to removable adhesiveASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load
Tack350ASTM D 2979
Expected Exterior LifeTwo years
Additional Information Erratic shear due to removable adhesive. Flammability: Contact Tech Service at 508-885-8263
Service Temperature -20°F to 176°F (-29°C to 80°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesiveRemovable
Product AgencyUL_UL Recognized
Color FamilyWhite
ConvertingRoll to Sheet
Film FamilyN/A
Master Web Width60
Other Available Widths54
Print TechnologyInkjet - Solvent, Screen - Solvent, Inkjet - HP Latex, Screen - UV, Offset - UV, Inkjet - UV Wide Format
Surface TypeCeramic Tile (some), Fiberglass, Flexible Magnet, Glass, HDPE, Linoleum, Lumber/Wood, Melamine (Formica), Metal, Paint (non-vinyl based), Painted Wallboard (non-vinyl based paint), Varnished Wood, Powder Coated Paint, Polypropylene, Painted Wood (non-vinyl based paint)
Surface TreatmentVarnish, Non-vinyl Based Paint, Corona Treat
Surface TextureSmooth
Surface ProfileRigid, Flat

Quick Ship

Stock Code Type Sheets In Box Trimmed Width Length Core Size MA NE CA Canada
1026295 Roll 1 Y 54 150 3 X X X -
1026296 Roll 1 Y 54 300 3 - X - -

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.