FLX064717

Flexcon® OptiFlex® Reseal™ 21133

Topcoated 2.3 Mil White BOPP, High-Performance Resealable Adhesive, TracRite™ 120

Home Technical Data and Details Availability

Benefits

  • Excellent surface smoothness allows for optimum ink laydown
  • Adhesive complies with 21 CFR 175.105 for indirect food contact 
  • Order custom widths without purchasing a whole master through Flexcon® FlexChoice™ for Packaging

Click to view PDF

Contact: +1 508 885 8200

Features

  • Topcoated 2.3 mil hard white polypropylene (BOPP) offers excellent resistance to shrinkage, moisture, humidity and product contents
  • Film opacity is ideal for achieving high-image graphics
  • Topcoat optimizes printability with flexographic, rotary screen, rotary letterpress inks, and hot stamping
  • Resealable pressure-sensitive acrylic adhesive bonds well to low- and high-surface energy laminated flexible packaging substrates with clean, quiet, and consistent reclosure
  • Adhesive offers excellent clarity and wet out characteristics
  • Polyester release liner for excellent on-press performance for tight-registration graphics & contains up to 60% post industrial recycled content

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 2.3 +/- 10 %56
Adhesive 0.7-0.8 +/- 0.118-20 +/- 3
Liner1.2 +/- 10 %30

Test Method: ASTM D 3652 (Modified for use with non-tape product)

Dimensional Stability (%)Value
MD No Shrinkage Observed
TD

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel16176
Acrylic22242
Glass15165
Polypropylene13143

Test Method: ASTM D 903 (Modified for 72 hr. RT dwell time)

Additional PropertiesValueTest Method
Expected ShearRoom Temp (hours): 100+ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load
Tack440ASTM D 2979
Additional Information
Service Temperature -20°F to 212°F (-29°C to 100°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesiveRemovable/Repositionable
Product AgencyN/A
Color FamilyWhite
ConvertingRoll Form
Film FamilyN/A
Master Web Width60
Other Available WidthsN/A
Print TechnologyFlexographic - Water, Inkjet - UV Narrow Format, Letterpress - UV, Offset - UV, Screen - UV, Flexographic - UV, Flexographic - Solvent, Hot Stamping
Surface TypeHDPE, PET, Polypropylene, PVC, Styrene, LSE Plastic, HSE Plastic
Surface TreatmentMold Release Agent, Flame Treat, Corona Treat
Surface TextureSmooth
Surface ProfileFlat, Flexible

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.