FLX059985
3.5 Mil White Opaque Vinyl, Removable Adhesive, Roll-to-Sheet Liner
Contact: +1 508 885 8200
FlexMark® WR with FlexMark® CP or FlexMark® OV6602 has been investigated by Underwriters Laboratories, Inc., and when used as a system, is in accordance with UL 410, the Standard for Floor Surfaces, for Floor-Graphic Materials (FGM).
Please refer to Flexcon's Warranty & Limited Remedy Policy for Graphic Advertising for Floors and Indoor Carpets, and Application and Removal Instructions. Nothing contained herein shall expand the Floors and Indoor Carpets Limited Warranty or otherwise be construed as a warranty or guarantee.
For Inkjet Printing: • Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
Formica® is a registered trademark of the Diller Corp.
| Thickness (Mils [microns]) | Mils | Microns |
|---|---|---|
| Film | 3.5 +/- 10 % | 89 |
| Adhesive | 0.8-0.9 +/- 0.1 | 20-23 +/- 3 |
| Liner | 6.9 +/- 10% | 175 |
Test Method: ASTM D 3652 (Modified for use with non-tape product)
| Dimensional Stability (%) | Value |
|---|---|
| MD | 0.75 |
| TD | 0.5 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Stainless Steel | 22 | 242 |
| Aluminum | 17 | 187 |
| Glass | 19 | 209 |
| Styrene | 18 | 198 |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Additional Properties | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): Erratic shear due to removable adhesive | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack | 350 | ASTM D 2979 |
| Expected Exterior Life | Two years | |
| Additional Information | Flammability: Contact Tech Service at 508-885-8263 | |
| Service Temperature | -20°F to 176°F (-29°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Removable |
| Product Agency | UL_UL Recognized |
| Color Family | White |
| Converting | Sheet Form |
| Film Family | N/A |
| Master Web Width | 54 |
| Other Available Widths | N/A |
| Print Technology | Inkjet - UV Wide Format, Offset - UV, Screen - UV, Inkjet - HP Latex, Screen - Solvent, Inkjet - Solvent |
| Surface Type | Polypropylene, Ceramic, Ceramic Tile (some), Flexible Magnet, Glass, HDPE, Linoleum, Lumber/Wood, Melamine (Formica), Metal, Paint, Paint (non-vinyl based), Painted Wallboard (non-vinyl based paint), Painted Wood (non-vinyl based paint), Powder Coated Paint, Varnished Wood, Fiberglass |
| Surface Treatment | Varnish, Non-vinyl Based Paint, Corona Treat |
| Surface Texture | Smooth |
| Surface Profile | Rigid, Flat |
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| 1025632 | Roll | 1 | Y | 54 | 150 | 3 | X | X | X | X |
| 1025633 | Roll | 1 | Y | 54 | 300 | 3 | X | X | - | - |
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.