FLX059983

Flexcon® FlexMark® CR CLEAR VINYL, COATED WITH A HIGH-PERFORMANCE REMOVABLE ADHESIVE

Promotional Advertising Clear Vinyl - Removable

Benefits

  • UL Recognized
  • Removable pressure-sensitive acrylic adhesive bonds well to smooth glass surface; clean removability from glass for up to one year

Contact: +1 508 885 8200

Features

  • 4.0 mil hard clear vinyl provides durability for ease of installation and removal
  • Printable via UV offset, Solvent and UV Screen, Solvent and UV Inkjet, and Latex
  • High-tack removable pressure-sensitive adhesive bonds well to smooth painted (non-vinyl) wallboards
  • Backed with a 90 lb. two-side polycoated layflat release liner ideal for sheet-form converting

Additional Details

FlexMark® CR with FlexMark® CP has been investigated by Underwriters Laboratories, Inc., and when used as a system, is in accordance with UL 410, the Standard for Floor Surfaces, for Floor-Graphic Materials (FGM).

Please refer to Flexcon's Warranty & Limited Remedy Policy for Graphic Advertising for Floors and Indoor Carpets, and Application and Removal Instructions. Nothing contained herein shall expand the Floors and Indoor Carpets Limited Warranty or otherwise be construed as a warranty or guarantee. For Inkjet Printing:

• Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming

Technical Data

Physical Properties

Thickness (Mils [microns]) MilsMicrons
Film 4.0 +/- 10%102
Adhesive 0.8-0.9 +/- 0.120-23 +/- 3
Liner6.9 +/- 10%175

Test Method: ASTM D 3652 (Modified for use with non-tape products)

Dimensional Stability (%)Value
MD 0.5
TD 0.5

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel27297
Glass27297
Aluminum29319
Styrene51561

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Additional PropertiesValueTest Method
Expected Shear1ASTM D 3654 Method Aa. 1 hr. dwellb. 1 sq. in. surfacec. 4 lb. load
Tack350ASTM D 2979
Expected Exterior LifeTwo years
Additional Information
Service Temperature -20°F to 176°F (-29°C to 80°C)
Minimum Application Temperature 50°F (10°C)
Storage StabilityTwo years stored at 70°F (21°C) and 50% relative humidity

Product Details

TitleDescription
AdhesiveRemovable
Product AgencyUL_UL Recognized
Color FamilyClear
ConvertingRoll to Sheet
Film FamilyN/A
Master Web Width60
Other Available Widths54, 54
Print TechnologyInkjet - UV Wide Format, Offset - UV, Screen - UV, Inkjet - HP Latex, Screen - Solvent, Inkjet - Solvent
Surface TypeCeramic Tile (some), Glass, HDPE, Lumber/Wood, Melamine (Formica), Metal, Paint (non-vinyl based), Painted Wallboard (non-vinyl based paint), Painted Wood (non-vinyl based paint), Polypropylene, Powder Coated Paint, Varnished Wood, Flexible Magnet, Ceramic
Surface TreatmentNon-vinyl Based Paint, Varnish
Surface TextureSmooth
Surface ProfileRigid, Flat

Quick Ship

Stock Code Type Sheets In Box Trimmed Width Length Core Size MA NE CA Canada
1025618 Roll 1 Y 54 150 3 X - - X

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.