FLX019141
FlexMark® Floor Art™ 6610 with Flexcon® FlexMark® OV6601, FlexMark® OV6602, or FlexMark® OV6603BN has been investigated by Underwriters Laboratories, Inc., and when used as a system, is in accordance with UL 410, the Standard for Floor Surfaces, for Floor-Graphic Materials (FGM).
Please refer to Flexcon’s Warranty & Limited Remedy Policy for Graphic Advertising for Floors and Indoor Carpets, and Application and Removal Instructions. Nothing contained herein shall expand the Floors and Indoor Carpets Limited Warranty or otherwise be construed as a warranty or guarantee.
For Inkjet Printing:
• Typical max. ink limit = 250% • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming
Contact: +1 508 885 8200
| Value | Thickness (Mils[microns]) |
|---|---|
| Film | 3.4 (86) +/- 10% |
| Adhesive | 1.1-1.2 (28-30) +/- 0.1 (3) |
| Liner | 6.9 (175) +/- 10% |
Test Method: ASTM D 3652 (Modified for use with non-tape products)
| Value | Dimensional Stability (%) |
|---|---|
| MD | 0.50 |
| TD | 0.50 |
Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)
| Value | Chemical Resistance |
|---|---|
| Isopropyl Alcohol | Good |
| Oil (SAE 10W-30) | Good |
| Vinegar | Good |
| Water | Good |
Test Method: ASTM D 896 (Modified for number of cycles and cycle time)
| Ultimate Peel from | Average Oz/In | (N/m) |
|---|---|---|
| Ceramic Tile | 3 | (33) |
| Linoleum | 3 | (33) |
| PVC Tile | 24 | (264) |
| Sealed Concrete | 4 | (44) |
Test Method: ASTM D 903 (Modified for 72 hour dwell time)
| Property | Value | Test Method |
|---|---|---|
| Expected Shear | Room Temp (hours): 5 | ASTM D 3654 Method A a. 1 hr. dwell b. 1 sq. in. surface c. 4 lb. load |
| Tack (gm/sq cm) | 130 | ASTM D 2979 |
| Expected Exterior Life | Indoor use only | |
| Service Temperature Range | -40°F to 176°F (-40°C to 80°C) | |
| Minimum Application Temperature | 50°F (10°C) | |
| Storage Stability | Two years when stored at 70°F (21°C) and 50% relative humidity |
| Title | Description |
|---|---|
| Adhesive | Application Specific |
| Product Agency | UL Recognized |
| Color Family | White |
| Converting | Sheet Form |
| Double Face | 0 |
| Film Family | Vinyl |
| Master Web Width | 54.000 |
| Other Available Widths | N/A |
| Print Technology | UV Offset,UV Screen,Solvent Inkjet,Solvent Screen,UV Inkjet - Wide,HP Latex |
| Quilon | 0 |
| Remoist | 0 |
| Surface Type | Commercial PVC Tile,Linoleum,Some Ceramic Tile,Sealed Concrete |
| Surface Treatment | Floor Sealer,Polish,Varnish,Wax |
| Surface Texture | Smooth |
| Surface Profile | Flat |
Pricing Overview
MSI Pricing
Roll Pricing
SQF Pricing
| Stock Code | Type | Sheets In Box | Trimmed | Width | Length | Core Size | MA | NE | CA | Canada |
|---|---|---|---|---|---|---|---|---|---|---|
| FV40018 | R | N/A | N | 54 | 0 | 6 | X | X | - | - |
| FV40018AB | R | N/A | Y | 54 | 150 | 3 | X | - | X | X |
| FV40018B | R | N/A | Y | 54 | 300 | 3 | X | - | - | X |
Please log in to view sales figures.
Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications.
Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.
Purchasers must independently determine the material’s suitability for their intended use. No distributor,
salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated.
FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.
Modified on: