FLX063986

FlexMark® BilBrd™ CWRTS 2 MIL CAST WHITE OPAQUE VINYL, PERM ADHESIVE, LAYFLAT SHEET LINER

Home Technical Data and Details Pricing Quick-Ship

Features & Benefits

  • 2 mil white opaque cast vinyl is part of the Painted-On-Look Cast System, FlexMark® BilBrd™ CWRTS and BusArt™ OV5055 - for rough, textured walls. Graphics applied with heat gun and foam roller
  • The Painted-On-Look Cast System has excellent dimensional stability, resistance to heat, and conformability along with 150% elongation
  • Permanent adhesive adheres to rough, textured surfaces (unsealed/sealed concrete, and brick)
  • The unsealed surface must not have any loose paint, grit or chalk present
  • Backed with a 90 lb. moisture-stable polycoated layflat release liner for ease of converting
  • Printable via UV and solvent inkjet, UV and solvent screen, and latex
  • Graphics remove cleanly (removability is optimized with heat)

The system comprises of FlexMark® BilBrd™ CWRTS base film and BusArt™ OV5055 overlaminate. For installation instructions, visit: Flexcon's Technical Guide and Application Instructions. For Inkjet Printing: • Typical max. ink limit = 250%; • When storing printed graphics, sheeted, stacked or in roll-form, consider leaving an unprinted margin (about 1/4") to allow for potential shrinkage of the film before trimming Due to the variability of the application surface and the heat installation method, peel data on the REVERSE SIDE is based on stainless steel.

Product Applications

  • Supreme - Promotional Advertising - Wall Graphics - Rough Textured Painted on Look
Click to print

Contact: +1 508 885 8200

Technical Data

Physical Properties

ValueThickness (Mils[microns])
Film2.0 (51) +/- 10%
Adhesive 1.5-1.6 (38-41) +/- 0.1 (3)
Liner6.9 (175) +/- 10%

Test Method: ASTM D 3652 (Modified for use with non-tape products)

ValueDimensional Stability (%)
MD0.20
TD0.10

Test Method: Applied Shrinkage: 24 hour dwell time on aluminum panel then 24 hours at 160°F (71°C)

Adhesion Properties

Ultimate Peel fromAverage Oz/In(N/m)
Stainless Steel55(605)

Test Method: ASTM D 903 (Modified for 72 hour dwell time)

Expected Shear

PropertyValueTest Method
Expected Shear Room Temp (hours): 25ASTM D 3654 Method A
a. 1 hr. dwell
b. 1 sq. in. surface
c. 4 lb. load
Tack (gm/sq cm)420ASTM D 2979
Expected Exterior Life7 years
Service Temperature Range-40°F to 176°F (-40°C to 80°C)
Minimum Application Temperature50°F (10°C)
Storage StabilityTwo years when stored at 70°F (21°C) and 50% relative humidity

Product Details

Title Description
Adhesive Permanent,Removable with Heat
Product Agency N/A
Color Family White
Converting Roll to Sheet,Sheet Form
Double Face 0
Film Family Vinyl
Master Web Width 54.000
Other Available Widths N/A
Print Technology HP Latex,Solvent Inkjet,Solvent Screen,UV Inkjet - Wide,UV Screen
Quilon 0
Remoist 0
Surface Type Unsealed Concrete,Brick
Surface Treatment Dirt,Dust,Oil,Varnish
Surface Texture Rough
Surface Profile Compound Curve,Rigid

Pricing Overview

MSI Pricing

Roll Pricing

SQF Pricing

Quick Ship

Stock Code Type Sheets In Box Trimmed Width Length Core Size MA NE CA Canada
CWRTS R N/A N 54 1 6 X - - -

Historical Sales

Please log in to view sales figures.

Product Performance and Suitability

Descriptive information, performance data, and recommendations for Flexcon products are guides and not specifications. Providing this information is to assist you and does not constitute a warranty of any kind by Flexcon.

Purchasers must independently determine the material’s suitability for their intended use. No distributor, salesman, or representative of Flexcon is authorized to provide any warranty or guarantee beyond what is stated. FLEXCON MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, COURSE OF PERFORMANCE, OR TRADE USAGE.

Modified on: